C0750Cruise Control Brake Switch
The cruise control or chassis module has detected an implausible signal from the dedicated cruise control brake switch. This switch is independent from the stop lamp switch and disengages cruise control when the driver brakes.
Can I keep driving? Yes
You can keep driving normally. Schedule a check soon so emissions and performance are not affected.
Sistema Afectado
Chasis · ABS, frenos y suspensión
Afecta el chasis: sensores ABS, control de tracción, frenos o suspensión.
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
Symptoms You Will Notice
What you may observe when this code appears
- ABS warning light on ESC/stability control deactivated Possible reduced brake assist Speedometer may behave erratically
Possible Causes
The components or conditions that trigger this code
- 1Cruise control brake switch failed or misadjusted Wiring or connector fault Internal cruise control module fault
How to Fix It — Step by Step
Recommended diagnostic and repair procedure
- 1Difficulty: easy. Estimated time: 0.3-1.5 hours. Estimated cost: €30-€
- 2DIY possible
Note: This information is for general reference. For precise diagnostics and safety repairs, always consult a certified mechanic.
Estimated Cost
Approximate range in USD (varies by region and shop)
ABS / brake sensors
* Diagnosis only: $50–$150
Quick Info
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly: