C0805Steering Angle Sensor Calibration
The chassis or stability control module reports that the steering angle sensor has not been calibrated or that the calibration data has been lost. ESP requires a calibrated zero position and is disabled until calibration is performed.
Can I keep driving? Yes
You can keep driving normally. Schedule a check soon so emissions and performance are not affected.
Sistema Afectado
Chasis · ABS, frenos y suspensión
Afecta el chasis: sensores ABS, control de tracción, frenos o suspensión.
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
Symptoms You Will Notice
What you may observe when this code appears
- ABS warning light on ESC/stability control deactivated Possible reduced brake assist Speedometer may behave erratically
Possible Causes
The components or conditions that trigger this code
- 1Calibration required after battery disconnect or repair Sensor lost calibration data Wheel alignment incorrect
- 2blocking calibration
How to Fix It — Step by Step
Recommended diagnostic and repair procedure
- 1Difficulty: easy. Estimated time: 0.2-1 hours. Estimated cost: €40-€
- 2Professional repair recommended
Note: This information is for general reference. For precise diagnostics and safety repairs, always consult a certified mechanic.
Estimated Cost
Approximate range in USD (varies by region and shop)
ABS / brake sensors
* Diagnosis only: $50–$150
Quick Info
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly: