P0010"A" Camshaft Position Actuator Circuit (Bank 1)
An electrical fault in the bank 1 intake camshaft position actuator solenoid (variable valve timing). The ECU monitors current and feedback on the oil control valve and sets this code when the circuit is open, shorted, or out of range.
This code also has a manufacturer-specific definition:
Can I keep driving? With caution
You can drive to the shop, but do not postpone the repair. The problem may worsen and damage other components.
Sistema Afectado
Aire / Combustible · Inyección, MAF, MAP, O₂
Relacionado con la mezcla aire-combustible: sensores de flujo, presión, inyectores o bomba.
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
Symptoms You Will Notice
What you may observe when this code appears
- Check engine light on Power loss especially in mid-rpm range Possible rough idle or stalling Increased fuel consumption
Possible Causes
The components or conditions that trigger this code
- 1Oil control valve electrically failed Wiring or connector fault to actuator
How to Fix It — Step by Step
Recommended diagnostic and repair procedure
- 1Difficulty: medium. Estimated time: 0.5-2.5 hours. Estimated cost: €80-€
- 2DIY possible
Note: This information is for general reference. For precise diagnostics and safety repairs, always consult a certified mechanic.
Estimated Cost
Approximate range in USD (varies by region and shop)
Varies by diagnosis
* Diagnosis only: $50–$150
Quick Info
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly: