P02D8Cylinder 7 Fuel Injector A Offset Learning At Min Limit
The PCM applies a per-cylinder injector offset (Mengenausgleich) to compensate for production-tolerance differences in injector flow rate. On cylinder 7 the learned correction has reached its minimum value — the injector is delivering significantly more fuel than the calibrated reference and the controller cannot trim it any further.
Can I keep driving? With caution
You can drive to the shop, but do not postpone the repair. The problem may worsen and damage other components.
Sistema Afectado
Aire / Combustible · Inyección, MAF, MAP, O₂
Relacionado con la mezcla aire-combustible: sensores de flujo, presión, inyectores o bomba.
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
Symptoms You Will Notice
What you may observe when this code appears
- Check engine light on Misfire or rough idle on the affected cylinder Increased fuel consumption Possible fuel smell or smoke from exhaust
Possible Causes
The components or conditions that trigger this code
- 1Injector over-delivering
How to Fix It — Step by Step
Recommended diagnostic and repair procedure
- 1Difficulty: hard. Estimated time: 1-4 hours. Estimated cost: €200-€
- 2Professional repair recommended
Note: This information is for general reference. For precise diagnostics and safety repairs, always consult a certified mechanic.
Estimated Cost
Approximate range in USD (varies by region and shop)
Sensors + injectors
* Diagnosis only: $50–$150
Quick Info
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly: