P0824Gear Lever Y Position Sensor 1 Circuit Intermittent/Erratic
Gear lever Y position sensor 1 signal jumps or drops out. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Can I keep driving? With caution
You can drive to the shop, but do not postpone the repair. The problem may worsen and damage other components.
Sistema Afectado
Transmisión · Caja y solenoides
La avería está en la transmisión: solenoides, sensores de velocidad o presión de aceite.
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
Symptoms You Will Notice
What you may observe when this code appears
- Check engine or transmission warning light on Harsh
- delayed
- or missing shifts Possible limp mode (locked in one gear) Slipping or shuddering during gear changes
Possible Causes
The components or conditions that trigger this code
- 1Worn rotary contact Connector with intermittent contact under vibration Harness routed against vibrating component
How to Fix It — Step by Step
Recommended diagnostic and repair procedure
- 1Difficulty: medium. Estimated time: 0.6-3 hours. Estimated cost: €200-€
- 2Professional repair recommended
Note: This information is for general reference. For precise diagnostics and safety repairs, always consult a certified mechanic.
Estimated Cost
Approximate range in USD (varies by region and shop)
Varies by diagnosis
* Diagnosis only: $50–$150
Quick Info
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly: