P0833Clutch Pedal Switch B Circuit
General electrical fault on the second clutch pedal switch B — provides redundant clutch-state detection (one switch upper end of pedal travel, other lower end) so the ECM can verify both ends of pedal motion. Used for accurate cranking and cruise enable logic.
Can I keep driving? With caution
You can drive to the shop, but do not postpone the repair. The problem may worsen and damage other components.
Sistema Afectado
Transmisión · Caja y solenoides
La avería está en la transmisión: solenoides, sensores de velocidad o presión de aceite.
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
Symptoms You Will Notice
What you may observe when this code appears
- Check engine or transmission warning light on Harsh
- delayed
- or missing shifts Possible limp mode (locked in one gear) Slipping or shuddering during gear changes
Possible Causes
The components or conditions that trigger this code
- 1Open or shorted switch wire
How to Fix It — Step by Step
Recommended diagnostic and repair procedure
- 1Difficulty: easy. Estimated time: 0.2-1 hours. Estimated cost: €40-€
- 2DIY possible
Note: This information is for general reference. For precise diagnostics and safety repairs, always consult a certified mechanic.
Estimated Cost
Approximate range in USD (varies by region and shop)
Varies by diagnosis
* Diagnosis only: $50–$150
Quick Info
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly: