P088CReverse Inhibit Control Circuit Low
Voltage on the reverse inhibit control circuit is below the expected window. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Can I keep driving? NO
STOP the vehicle in a safe place. Continuing to drive may cause serious engine damage or put your safety at risk.
Sistema Afectado
Transmisión · Caja y solenoides
La avería está en la transmisión: solenoides, sensores de velocidad o presión de aceite.
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
Symptoms You Will Notice
What you may observe when this code appears
- Check engine or transmission warning light on Harsh
- delayed
- or missing shifts Possible limp mode (locked in one gear) Slipping or shuddering during gear changes
Possible Causes
The components or conditions that trigger this code
- 1Wire shorted to ground Actuator internal short Connector pins corroded - high contact resistance
How to Fix It — Step by Step
Recommended diagnostic and repair procedure
- 1Difficulty: medium. Estimated time: 0.5-3 hours. Estimated cost: €120-€
- 2Professional repair recommended
Note: This information is for general reference. For precise diagnostics and safety repairs, always consult a certified mechanic.
Estimated Cost
Approximate range in USD (varies by region and shop)
Varies by diagnosis
* Diagnosis only: $50–$150
Quick Info
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly: