P0E63Battery Charger A Enable Circuit High
The battery charger A enable circuit reports a enable circuit high condition. The on-board charger negotiates voltage, current and safety with the EVSE; a fault interrupts charging or limits it to AC slow-charge despite a DC fast charger being attached.
Can I keep driving? NO
STOP the vehicle in a safe place. Continuing to drive may cause serious engine damage or put your safety at risk.
Sistema Afectado
Motor · Powertrain
La falla pertenece al grupo motopropulsor (motor y gestión electrónica).
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
Symptoms You Will Notice
What you may observe when this code appears
- Charge status indicator shows fault Charging may not start or interrupts Slower-than-expected charge rate
Possible Causes
The components or conditions that trigger this code
- 1Wire shorted to B+ Open enable switch Connector pins corroded - high contact resistance
How to Fix It — Step by Step
Recommended diagnostic and repair procedure
- 1Difficulty: medium. Estimated time: 1-5 hours. Estimated cost: €200-€
- 2Professional repair recommended
Note: This information is for general reference. For precise diagnostics and safety repairs, always consult a certified mechanic.
Estimated Cost
Approximate range in USD (varies by region and shop)
Varies by diagnosis
* Diagnosis only: $50–$150
Quick Info
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly: