P22B7O2 Sensor Pumping Current Trim Circuit High (Bank 1 Sensor 2)
O2 trim line on bank 1 sensor 2 stuck high — short to B+. A drifted or sluggish lambda sensor lets the mixture run lean or rich without correction — fuel economy and emissions suffer immediately.
Can I keep driving? With caution
You can drive to the shop, but do not postpone the repair. The problem may worsen and damage other components.
Sistema Afectado
Motor · Powertrain
La falla pertenece al grupo motopropulsor (motor y gestión electrónica).
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
Symptoms You Will Notice
What you may observe when this code appears
- Check engine light on Increased fuel consumption Possible rough idle or hesitation Failed emissions test
Possible Causes
The components or conditions that trigger this code
- 1Short to B+ Connector pins corroded - high contact resistance Supply wire pinched against B+ source
How to Fix It — Step by Step
Recommended diagnostic and repair procedure
- 1Difficulty: medium. Estimated time: 0.5-2.5 hours. Estimated cost: €80-€
- 2DIY possible
Note: This information is for general reference. For precise diagnostics and safety repairs, always consult a certified mechanic.
Estimated Cost
Approximate range in USD (varies by region and shop)
Varies by diagnosis
* Diagnosis only: $50–$150
Quick Info
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly: