P239EO2 Sensor Out of Range During Deceleration Bank 1 Sensor 2
During fuel cutoff on overrun the post-catalyst lambda sensor on bank 1 should drift toward a fixed lean reference voltage. If it stays outside the expected window the ECU sets this fault, indicating either a slow or stuck downstream sensor or an exhaust leak that draws unburnt gas across it.
Can I keep driving? With caution
You can drive to the shop, but do not postpone the repair. The problem may worsen and damage other components.
Sistema Afectado
Motor · Powertrain
La falla pertenece al grupo motopropulsor (motor y gestión electrónica).
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
Symptoms You Will Notice
What you may observe when this code appears
- Check engine light on Increased fuel consumption Possible rough idle or hesitation Failed emissions test
Possible Causes
The components or conditions that trigger this code
- 1Sensor element slow or aged
How to Fix It — Step by Step
Recommended diagnostic and repair procedure
- 1Difficulty: medium. Estimated time: 0.6-1.5 hours. Estimated cost: €120-€
- 2DIY possible
Note: This information is for general reference. For precise diagnostics and safety repairs, always consult a certified mechanic.
Estimated Cost
Approximate range in USD (varies by region and shop)
Varies by diagnosis
* Diagnosis only: $50–$150
Quick Info
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly: