P250COil level sensor failure, Powertrain Control Module (PCM) failure, Wiring issue
⚙️ Powertrain (Motor y Transmisión)🏭 Specific to Audi
The oil level sensor signal voltage reads below the lower limit, typically a short to ground or an open at the reference end of the sender. The ECM treats the input as invalid and ignores oil-low warnings until the circuit is repaired.
View on another brand:
⚠️
Can I keep driving? With caution
You can drive to the shop, but do not postpone the repair. The problem may worsen and damage other components.
Sistema Afectado
Motor · Powertrain
La falla pertenece al grupo motopropulsor (motor y gestión electrónica).
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
WhatsAppLlamar
¿Vendes repuestos? Anúnciate aquíAdvertising Space — Google AdSense
Possible Causes
The components or conditions that trigger this code
- 1Signal wire shorted to ground
- 2Sender shorted internally
- 3Connector pins corroded - high contact resistance
Advertising Space — Google AdSense
Estimated Cost
Approximate range in USD (varies by region and shop)
$100—$800
Varies by diagnosis
* Diagnosis only: $50–$150
Advertising Space — Google AdSense
Quick Info
CodeP250C
CategoryMotor (P)
ManufacturerAudi
SeverityModerada
Symptoms0
Causes3
Solution steps0
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly:
Advertising Space · Sidebar AdSense