P25E3B Camshaft Position - Stuck In Locked Position Bank 1
Camshaft phaser B on bank 1 will not unlock from its base position. The phaser stays at the park-lock angle and cannot be advanced or retarded as commanded.
Can I keep driving? With caution
You can drive to the shop, but do not postpone the repair. The problem may worsen and damage other components.
Sistema Afectado
Motor · Powertrain
La falla pertenece al grupo motopropulsor (motor y gestión electrónica).
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
Symptoms You Will Notice
What you may observe when this code appears
- Check engine light on Power loss especially in mid-rpm range Possible rough idle or stalling Increased fuel consumption
Possible Causes
The components or conditions that trigger this code
- 1Park-lock pin stuck in the locked groove Low oil pressure cannot push the lock pin out Oil control valve blocked by debris
How to Fix It — Step by Step
Recommended diagnostic and repair procedure
- 1Difficulty: hard. Estimated time: 1.5-5 hours. Estimated cost: €200-€
- 2Professional repair recommended
Note: This information is for general reference. For precise diagnostics and safety repairs, always consult a certified mechanic.
Estimated Cost
Approximate range in USD (varies by region and shop)
Varies by diagnosis
* Diagnosis only: $50–$150
Quick Info
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly: