P2615Camshaft A Position Signal Output Circuit Low Bank 1
The buffered camshaft A position output that the engine controller sends to other modules (transmission, body, ignition module) is below the expected level on bank 1. Other modules cannot use the cam phase reference for synchronisation.
Can I keep driving? With caution
You can drive to the shop, but do not postpone the repair. The problem may worsen and damage other components.
Sistema Afectado
Motor · Powertrain
La falla pertenece al grupo motopropulsor (motor y gestión electrónica).
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
Symptoms You Will Notice
What you may observe when this code appears
- Check engine light on Power loss especially in mid-rpm range Possible rough idle or stalling Increased fuel consumption
Possible Causes
The components or conditions that trigger this code
- 1Output wire shorted to ground Output buffer transistor failed Connector pins corroded - high contact resistance
How to Fix It — Step by Step
Recommended diagnostic and repair procedure
- 1Difficulty: medium. Estimated time: 0.8-3 hours. Estimated cost: €120-€
- 2Professional repair recommended
Note: This information is for general reference. For precise diagnostics and safety repairs, always consult a certified mechanic.
Estimated Cost
Approximate range in USD (varies by region and shop)
Varies by diagnosis
* Diagnosis only: $50–$150
Quick Info
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly: