P2CF8Engine Coolant Bypass Valve D Control Circuit Driver Current/Temperature Too High
The output driver for the engine coolant bypass valve D actuator reports current or junction temperature above its protection threshold. Stalled actuator or short to ground.
Can I keep driving? NO
STOP the vehicle in a safe place. Continuing to drive may cause serious engine damage or put your safety at risk.
Sistema Afectado
Motor · Powertrain
La falla pertenece al grupo motopropulsor (motor y gestión electrónica).
Espacio para vendedores de repuestos
Aún no hay un anunciante en este espacio.
Symptoms You Will Notice
What you may observe when this code appears
- Check engine light on Cooling fan runs constantly or not at all Cabin heater weak or excessively hot Possible long warm-up time or hard cold start
Possible Causes
The components or conditions that trigger this code
- 1Bypass actuator mechanically jammed Control wire shorted to ground
How to Fix It — Step by Step
Recommended diagnostic and repair procedure
- 1Difficulty: hard. Estimated time: 2-6 hours. Estimated cost: €400-€
- 2Professional repair recommended
Note: This information is for general reference. For precise diagnostics and safety repairs, always consult a certified mechanic.
Estimated Cost
Approximate range in USD (varies by region and shop)
Varies by diagnosis
* Diagnosis only: $50–$150
Quick Info
Dig Deeper
Videos, images and service manuals
Have Another Code?
Look it up directly: